Sgb13-35 2500kVA Open Dry-Type Power Transformer

• Customization: Available
• Application: Power, Electronic, Rectifier
• Phase: Three
• Model NO.: SGB13-35 2500kVA
• Core: Core-type Transformer
• Cooling Method: Dry-type Transformer
• Winding Type: Multi-winding Transformer
• Certification: ISO9001-2000, ISO9001, CCC
• Usage: Power Transformer, Distribution Transformer
• Frequency Characteristics: Low Frequency
• Shape of Core: Ring
• Brand: Ceeg
• Tapping Range: ±2X2.5%
• Vector Group: Dyn11, Yyn0
• High Voltage: 20kv
• Low Voltage: 0.4kv
• Rated Capacity: 500kVA
• Transport Package: Wooden Case / According Customers′ Demands
• Trademark: CEEG
• Origin: Jiangsu, China
• HS Code: 8504330000

Product Description

Product Description

 

\ FEATURES \

1. High quality and high permeability silicon steel with a multi-stage stepping process leads to low no-load loss.

2. The surface adopting nano paint self-leveling process leads to low noise.

3. Strong waterproof and short-circuit resistance, strong overload capacity, good electrical performance, safety, and reliability.

4. Through the simulation analysis of the electric field, temperature field, and magnetic field, CEEG is the first company in China to pass KEMA's E2, C2, and F1 tests.

5. The product can adopt a dual-mode structure scheme to meet the needs of different customer groups.

6. Special intelligent transformer solutions and big data cloud diagnosis technology are adopted to be online from time to time.

Product Parameters

 

10kV Class SG(B)10 Product Data
Rated High Voltage:106)kV         Connection Symbol:Dyn11/Yyn0
Nominal Low-voltage:0.4kV     Insulation level: L75 AC 35/LAC3      Tapping Range:±2×2.5%
Model No.	UK  %	Air loss PO(W)	Load loss  ( 120ºC) PK(W)	IO ( %)	LPA (AN ) dB	Gauge m*n	SIZE L*B*H(mm)	Body size   (including feet)	Body weight
SG10-100	4%	400	1370	1.8	43	1215×860×1050	660 x660	675	1700 x1200 x1660
SG10-125	4%	470	1610	1.6	43	1215×860x1060	660 x660	720	1700 x1200 x1660
SGB10-160	4%	540	1850	1.6	44	1260×860×1130	660 x 660	890	1700 x 1200 x 1660
SGB10-200	4%	620	2200	1.4	44	1260×860×1105	660 x660	920	1700 x1200 x 1660
SGB10-250	4%	720	2400	1.4	46	1260×860×1130	660 x660	1050	1700 x 1200 x 1660
SGB10-315	4%	880	3730	1	47	1390×860×1155	660 x660	1410	1900 x1300 x1660
SGB10-400	4%	980	4280	1	48	1390×860×1375	820x660	1565	1900 x1300 x1660
SGB10-500	4%	1160	5230	1	49	1390×860×1390	820 x660	1680	1900 x1300x1660
SGB10-630	4%	1340	6290	0.85	51	1475×1020×1375	820x660	1800	2100x1400 x2015
SGB10-630	6%	1300	6400	0.85	51	1475×1020×1375	820 x660	1800	2100 x1400 x2015
SGB10-800	6%	1520	7460	0.85	52	1475×1020×1410	820x820	1930	2100 x1400 x2015
SGB10-1000	6%	1770	8760	0.85	52	1610×1020×1435	820 x820	2355	2100 x1400 x2015
SGB10-1250	6%	2090	10300	0.85	53	1610×1020×1630	820 x820	2940	2300x1500 x2120
SGB10-1600	6%	2450	12500	0.85	54	1790 x1150 x 1730	1070 x 1070	3540	2300 x 1500 x2120
SGB10-2000	6%	3050	15500	0.7	54	1790 x 1150 x1760	1070 x 1070	4050	2400 x 1500 x 2300
SGB10-2500	6%	3600	18400	0.7	55	1900x1150x1895	1070 x1070	4790	2600 x 1500 x2500
SGB10-3150	6%	4030	192200	0.7	57	2100 x 1150 x1960	1070 x 1070	6215	2600 x1500x2500

\ CERTIFICATED & QUALIFIED \

SCB series cast resin dry-type transformers have reached the first-level energy efficiency standard of GB20052-2020, and won the 3C, PCCC energy-saving certification, ISO-9001, ISO-45001, and ISO-14001 certificates.
CEEG's cast resin dry-type power transformers have been widely adopted in key projects by customers from all over the world. For example, they have been chosen to serve in the Qingdao International Sailing Center, Beijing Urban sub-Center, Beijing Stadium the Skating Hall, Nanjing Metro, Shanghai EXPO Exhibition Center, etc.


\ DESIGN & MANUFACTURE PROCESS \

Based on more than 30 years of design, manufacturing, and experimental experience in the transformer industry, CEEG has developed a set of advanced three-dimensional + parametric design software, which can realize automatic design, cost optimization, and simulation.
Fully considering the requirements of the national and industrial standards, ensuring the advantageous design of products.

The high-voltage winding conductor is wound with a high-quality conductor and reinforced with long and short-cut glass fiber felt. Poured by the advanced Heidrich vacuum pouring system under vacuum. Effectively restrain the occurrence of partial discharge, and the partial discharge is ≤ 5pc.

The low-voltage winding adopts a high-quality foil conductor and is wound on an automatic foil winding machine. The foil winding machine adopts the patented technology of foil wire hydraulic energy-saving tension crimping device, high-precision detection of ±0.5mm, and advanced argon arc welding technology, which plays a key role in ensuring the quality of coil winding.

The iron core adopts a high-quality high magnetic conductivity-oriented silicon steel sheet, a 45° full oblique step lapping process, and the surface adopts special moisture-proof and rust-proof coating, which effectively reduces the no-load current and noise level.
\ USE & PACKING \

 SERVICE CONDITIONS - The installation site shall not be flooded by water, the altitude shall not exceed 1000m, and the ambient temperature shall not be higher than 40ºC. The relative humidity is 100%, and the environment is 40ºC to -25ºC (-25ºC requires an on-load tap changer and temperature controller).


PACKAGING & TRANSPORTATION - The products can be partially disassembled and transported (such as on-load tap changer, temperature controller, air cooling device, enclosure, etc. can be packaged separately) or packed as one piece in packaging boxes for transportation.


VISUAL INSPECTION BEFORE INSTALLATION - After opening the package, remove the protective device and check the external conditions, especially paying attention to the mechanical integrity of the coil and iron core, and the bolt fastening at the connection.


INSPECTION BEFORE OPERATION - Measure the DC resistance of high voltage and low voltage windings. Then check the grounding of the iron core to see whether the grounding is reliable and whether foreign matters are overlapping. Last to test the insulation resistance.

ENERGIZING - Before putting into operation, the transformer shall be put into trial operation under no-load, and the protection system shall be checked and adjusted after 3 times of impulse closing.





\ ABOUT CEEG \

3 INDUSTRIAL ZONES 
4 FACTORIES
15 OVERSEAS BRANCHES
80+ GLOBAL MARKETS

THIS IS OUR DEVELOPMENT -  Headquartered in Nanjing, CEEG has always been adhering to the core values of "foresight, innovation, and responsibility" since its establishment in 1990, focusing on production and manufacturing for more than 30 years. In years of development, CEEG has Integrated independent research and development, intelligent manufacturing, and smart marketing services.

OUR PRODUCT - Our technical team has continued to explore and innovate boldly, and has successfully developed nearly a hundred products including evaporative transformers, load centers, 35kV amorphous dry transformers, nuclear power transformers, slow harmonic transformers, high-temperature transformers.

OUR PARTNERS - Our products have been safely operating in major coal groups such as Shenhua Group, Anhui Tongling Mining Group, Pingdingshan Coal Industry Group, Jincheng Coal Industry Group, and Kaolain Group. Many well-known companies such as China Mobile, China Telecom, Inner Mongolia First Machinery, Inner Mongolia Pingzhuang Energy, and Jialing Motor also have established good partnerships with us. We also established long-term strategic cooperative relations with excellent enterprises all over the world, and our business partners include many great companies such as DuPont, Siemens, Hitachi Metals, and ABB. Our power transformers have been sold to over 80 countries and regions and got high recognition from customers overseas.