Product Description
FEATURES
\ FEATURES \
1. High quality and high permeability silicon steel with a multi-stage stepping process leads to low no-load loss.
2. The surface adopting nano paint self-leveling process leads to low noise.
3. Strong waterproof and short-circuit resistance, strong overload capacity, good electrical performance, safety, and reliability.
4. Through the simulation analysis of the electric field, temperature field, and magnetic field, CEEG is the first company in China to pass KEMA's E2, C2, and F1 tests.
5. The product can adopt a dual-mode structure scheme to meet the needs of different customer groups.
6. Special intelligent transformer solutions and big data cloud diagnosis technology are adopted to be online from time to time.
Product Parameters
| Traction rectifier transformer |
| Model No. |
Rated Capacity
kVA |
Rated voltage (KV) |
Tap |
Vector
Group |
Short circuit impedance% |
Efficiency |
Weight(kg) |
Gauge (mm) |
Dimensions(mm) |
| Network side |
valve side |
| ZQSC-800/10 |
800 |
10
6.3 |
0.66
0.69
0.96
1.10
3.0 |
2*2.5% |
Dyn11
Yyn0
Dd0 |
6.0
7.0
8.0
10.5
12.5 |
≥0.96 |
3500 |
820x 820 |
2250x 1400x 2300 |
| ZQSC-1000/10 |
1000 |
4330 |
820x 820 |
2250x 1450x 2400 |
| ZQSC-1250/10 |
1250 |
4900 |
820x 820 |
2350x 1500 x 2500 |
| ZQSC-1600/10 |
1600 |
4300 |
820x 1070 |
2600x 1600x 2500 |
| ZQSC- 1800/10 |
1800 |
5100 |
820x 1070 |
2600x 1600x 2550 |
| ZQSC-2000/10 |
2000 |
6000 |
1070x 1070 |
2650x 1700x 2600 |
| ZQSC-2500/10 |
2500 |
6700 |
1070x 1070 |
2700x1750x 2700 |
| ZQSC-2750/10 |
2750 |
7100 |
1070x 1070 |
2800x1750x 2800 |
| ZQSC-3300/10 |
3300 |
8200 |
1070x 1070 |
2800x 1800x 2900 |
| ZQSCB-1600/35 |
1600 |
5900 |
820x 1070 |
2280x 1300x 2420 |
| ZQSCB-2000/35 |
2000 |
6500 |
1070x 1070 |
2340x 1300 x 2595 |
| ZQSCB- 2500/35 |
2500 |
7500 |
1070x 1070 |
2500x 1400x 2620 |
| ZQSCB- 2750/35 |
2750 |
35
33 |
8600 |
1070x 1070 |
2500x 1400¥2750 |
| ZQSCB-3000/35 |
3000 |
9100 |
1070x 1070 |
2620x 1600x 2625 |
| ZQSCB- 3300/35 |
3300 |
9800 |
1070x 1070 |
2590x 1600x2745 |
| ZQSCB-4000/35 |
4000 |
10800 |
1070x 1070 |
2600x 1800x2770 |
| ZQSCB-4400/35 |
4400 |
11 900 |
1070x 1070 |
2730x 1800x 2795 |
Certifications
\ CERTIFICATED & QUALIFIED \
Energy storage specialty Dry-type transformer
Developed and produced with advanced technology, the specialty dry type transformer for energy storage system has very reliable quality and high cost-effectiveness. Application: wind, photovoltaic, flywheel, gravity, air energy storage, and pumped storage specialty transformers up to 35kV.
Our Advantages
\ DESIGN & MANUFACTURE PROCESS \
Based on more than 30 years of design, manufacturing, and experimental experience in the transformer industry, CEEG has developed a set of advanced three-dimensional + parametric design software, which can realize automatic design, cost optimization, and simulation.
Fully considering the requirements of the national and industrial standards, ensuring the advantageous design of products.
The high-voltage winding conductor is wound with a high-quality conductor and reinforced with long and short-cut glass fiber felt. Poured by the advanced Heidrich vacuum pouring system under vacuum. Effectively restrain the occurrence of partial discharge, and the partial discharge is ≤ 5pc.
The low-voltage winding adopts a high-quality foil conductor and is wound on an automatic foil winding machine. The foil winding machine adopts the patented technology of foil wire hydraulic energy-saving tension crimping device, high-precision detection of ±0.5mm, and advanced argon arc welding technology, which plays a key role in ensuring the quality of coil winding.
The iron core adopts a high-quality high magnetic conductivity-oriented silicon steel sheet, a 45° full oblique step lapping process, and the surface adopts special moisture-proof and rust-proof coating, which effectively reduces the no-load current and noise level.
\ USE & PACKING \
SERVICE CONDITIONS -
The installation site shall not be flooded by water, the altitude shall not exceed 1000m, and the ambient temperature shall not be higher than 40ºC. The relative humidity is 100%, and the environment is 40ºC to -25ºC (-25ºC requires an on-load tap changer and temperature controller).
PACKAGING & TRANSPORTATION - The products can be partially disassembled and transported (such as on-load tap changer, temperature controller, air cooling device, enclosure, etc. can be packaged separately) or packed as one piece in packaging boxes for transportation.
VISUAL INSPECTION BEFORE INSTALLATION - After opening the package, remove the protective device and check the external conditions, especially paying attention to the mechanical integrity of the coil and iron core, and the bolt fastening at the connection.
INSPECTION BEFORE OPERATION - Measure the DC resistance of high voltage and low voltage windings. Then check the grounding of the iron core to see whether the grounding is reliable and whether foreign matters are overlapping. Last to test the insulation resistance.
ENERGIZING - Before putting into operation, the transformer shall be put into trial operation under no-load, and the protection system shall be checked and adjusted after 3 times of impulse closing.
\ ABOUT CEEG \
3 INDUSTRIAL ZONES
4 FACTORIES
15 OVERSEAS BRANCHES
80+ GLOBAL MARKETS
THIS IS OUR DEVELOPMENT -
Headquartered in Nanjing, CEEG has always been adhering to the core values of "foresight, innovation, and responsibility" since its establishment in 1990, focusing on production and manufacturing for more than 30 years. In years of development, CEEG has Integrated independent research and development, intelligent manufacturing, and smart marketing services.
OUR PRODUCT - Our technical team has continued to explore and innovate boldly, and has successfully developed nearly a hundred products including evaporative transformers, load centers, 35kV amorphous dry transformers, nuclear power transformers, slow harmonic transformers, high-temperature transformers; there are also outstanding players in market segments: traction transformers, variable current explosion-proof transformers, multiple Pulse wave phase shifting, wind power conversion, photovoltaic conversion, three-phase three-column amorphous conversion, intermediate test conversion, data center supercomputing mobile equipment, etc. Among them, the star products of the company are the green and energy-saving "amorphous alloy dry-type transformer", the technology-leading "epoxy cast dry-type transformer", and the safe and reliable "flameproof dry-type transformer for mine use and mobile substation". The technology applied to the production has won more than 70 patent technology qualification honors.
OUR PARTNERS - Our products have been safely operating in major coal groups such as Shenhua Group, Anhui Tongling Mining Group, Pingdingshan Coal Industry Group, Jincheng Coal Industry Group, and Kaolain Group. Many well-known companies such as China Mobile, China Telecom, Inner Mongolia First Machinery, Inner Mongolia Pingzhuang Energy, and Jialing Motor also have established good partnerships with us. We also established long-term strategic cooperative relations with excellent enterprises all over the world, and our business partners include many great companies such as DuPont, Siemens, Hitachi Metals, and ABB. Our power transformers have been sold to over 80 countries and regions and got high recognition from customers overseas.
){kind=link}